Disc Harrow

Home » Products » Agricultural Equipment » Disc Harrow

A disc harrow is a farm implement that is used to cultivate the soil where crops are to be planted. It is also used to chop up unwanted weeds or crop remainders. The disc harrow consists of many iron or steel discs which have slight concavity and are arranged into two or four sections. When viewed from above, the four sections would appear to form an "X" which has been flattened to be wider than it is tall. The discs are also offset so that they are not parallel with the overall direction of the implement. This is so they slice the ground they cut over a little bit to optimize the result. The concavity of the discs as well as their being offset causes them to loosen and pick up the soil they cut.

1. Light Duty Harrow

The 1BQX series light-duty disc harrow are suitable for pulverizing and loosening clods after ploughing and for planning the land before sowing on cultivated land. The machine can make soil and fertilizer mix up, and clear away the stump of plants on light or medium soil, as well as prepare seed bed for planting.

The frame of this disc harrow is made of qualified steel tube, and the overall structure is simple and reasonable, strong and durable. The disc harrow is convenient to operate, easy to maintain and efficient in pulverizing and penetrating into the soil. Through the use of our disc harrow, the land will be smooth after tillage. All these satisfy the agricultural requirements of intensive cultivation.

Assembled with scalloped disc in the front and rear part, the disc harrow can be used with tractors in different power, ranging from 12HP to 80HP.

Light Duty Harrow

Specifications

Model 1BQX-1.1 1BQX-1.3 1BQX-1.5 1BQX-1.7 1BQX-2.0 1BQX-2.2 1BQX-2.3
Working width (mm) 1100 1300 1500 1700 2000 2200 2300
Working depth (mm) 100-140
No. of disc 12 14 16 18 20 22 24
Dia. of disc (mm/inch) 460 / 18"
Weight (kg) 200 220 250 270 300 400 420
Linkage Three point mounted
Matched power (hp) 12-18 15-18 20-25 25-30 35-40 40-45 55

2. Offset Mid-duty Harrow

1BJX middle-duty disc harrow is suitable for pulverizing and loosening clods after plowing and for planning the land before sowing on cultivated land. It can make soil and fertilizer mix up, and clean away the stump of plants. With reasonable structure, the machine is durable in use, easy to be operated and maintained, and can make the land surface smooth.

Offset Mid-duty Harrow

Specifications

Model 1BJX-1.7 1BJX-2.0 1BJX-2.2 1BJX-2.4 1BJX-2.5 1BJX-2.8
Working width (mm) 1700 2000 2200 2400 2500 2800
Working depth (mm) 140
No. of disc 16 18 20 22 24 26
Dia. of disc (mm) 560
Weight (kg) 400 434 463 620 760 800
Linkage Three point mounted
Matched power (hp) 45 50-55 55-60 65-70 75 80

3. Hydraulic Offet Light-duty Harrow

The 1BQ series mounted light-duty disc harrow is suitable for pulverizing and loosening colds after ploughing and for planning the land before sowing on cultivated land. It can mix up soil and fertilizer, clear away the stump of plants on light soil, and prepare seed bed for planting.

Hydraulic Offet Light-duty Harrow

Specifications

Model 1BQ-3.3 1BQ-3.4
Working width (mm) 3300 3400
Working depth (mm) 100-140
No. of disc 40 42
Dia. of disc (mm/inch) 460 / 18"
Weight (kg) 1000 1050
Linkage Trailed
Matched power (Hp) 80-100

4. Hydraulic Double Folding-wing Offet Mid-duty Harrow

1BJ series of wing-folded hydraulic offset medium harrow is suitable for crushing the heavy clay soil after tillage. This disc harrow has features of wide applications, easy transportation, compact structure, high productivity, convenient operation and maintenance, etc.

Hydraulic Double Folding-wing Offet Mid-duty Harrow

Specifications

Model 1BJ-4.4 1BJ-5.3 1BJ-6.0
Working width (mm) 4400 5300 6000
working depth (mm) 140
Dia. Of disc (mm) 560
No. of disc 40 48 56
Operation weight (kg) 1750 2200 2520
Matched power (Hp) 75-100 100-120
Productivity (Ha/hr) 2.7 3.3 3.5

5. Semi-hanging Offset Heavy-duty Harrow

1BZ(BX) semi-mounted offset heavy-duty disc harrow is suitable for stubbing before plowing and crushing soil or after plowing in the waste land and heavy soil. The disc harrow can also replace a plow to carry out the first operation in the long-cultivated land. It performs well in surface leveling, soil crushing and stubbing after plowing. The disc harrow also has the advantages of easy hanging, convenient adjustment, flexible turning, good road passing performance, etc.

Semi-hanging Offset Heavy-duty Harrow

Specifications

Model 1BZ(BX)-1.8 1BZ(BX)-2.0 1BZ(BX)-2.5 1BZ(BX)-3.0
Working width (mm) 1800 2000 2500 3000
Working depth (mm) 200
No. of disc 18 20 24 28
Dia. Of disc (mm) 660
Operation Weight (kg) 840 1050 1200 1350
Linkage Semi-mounted
Matched Power (hp) 70-90 100-120

6. Hydraulic Pair-setting Heavy Harrow

This disc harrow is applicable for breaking up the clods and loosening wasteland, shrub swamp, and heavy soil. It can rake the land instead of plough. It also has the features of wide working area, reasonable structure, strong raking capability, easy operation and maintenance, etc.

Hydraulic Pair-setting Heavy Harrow

Specifications

Model 1BZD-2.5 1BZD-2.8 1BZD-3.1 1BZD-3.7 1BZD-4.1 1BZD-4.7
Operation weight (kg) 1800 2000 2700 2800 2980 3360
No. of disc 22 26 28 32 36 42
Dia. of disc (mm) 660
Working width (mm) 2500 2800 3100 3700 4100 4700
Working depth (mm) 180-220
Matched power (hp) 100-120 120 120-150

7. Semi-hanging Offset Heavy Harrow

Having absorbed all advantages from such machines made in China and other countries, 1BZ series disc harrow can meet special agricultural requirements. The main frame is welded with rectangular tubes, on which assembled with hydraulic lifting transportation wheels, spring adjustable device and special used bearing assemblies. Due to the assembled structure, this disc harrow is strong and durable for operation, convenient for transportation. It also features small turning radius, easy adjustment and maintenance, etc.

Semi-hanging Offset Heavy Harrow

Specifications

Model 1BZ-2.0 1BZ-2.2 1BZ-2.5 1BZ-3.0 1BZ-3.4
Working width (mm) 2000 2200 2500 3000 3400
Working depth (mm) 200
No. of disc 18 20 24 28 32
Dia. Of disc (mm) 660
Operation weight (Kg) 1150 1250 1350 1500 1650
Linkage Trailed
Matched power (hp) 75-80 80-100 90-100 100-120

We is a professional disc harrow supplier in China. Our company offers a vast range of products, including straw pellet mill, disc blade, ploughing machine, auto broiler pan feeding system, and others.

Feedback Form
Feedback Form
Other Products
    1. Farm RidgerThe farm ridger has good adaptability, and allows for easy and convenient adjustment in ridging spacing, ridging height, ridging rows and angle.
      It can be matched with tractors in different power.
    1. Planting MachineThis planting machine is mainly used for spreading fertilizer in the field before cultivation and seeding after cultivation or applying fertilizer during seeding. It has compact structure, good performance ...
    1. Cropping MachineWide range of use: This cropping machine is suitable to be used to reap natural forage grass and plant herbage, alfalfa, reed, grass feed, etc. It is applicable to the flat grass land in agricultural ...
    1. Reaping MachineThis machine should be matched with walking tractor for working. Due to the small size and light weight, it is very easy and convenient to operate. It can even reap low stubble, and won't be limited by row ...