Feed Processing Equipment

Home » Products » Feed Processing Equipment
    1. Double Shaft Paddle Feed MixerThe double shaft paddle feed mixer is suitable for mixing, drying and cooling powder, flake, pellet and block materials. It features full open, high efficiency, less residue, and is adopted in the production of premixed materials, animal, poultry and aquatic feeds, additive and other chemicals, etc.
    1. Rotary Drum Feed MixerThe rotary drum feed mixer is used for mixing additive and micro-elements in the field of feeds, chemicals, pharmacy, painting, fertilizer, food, etc. It features high mixing uniformity, good air tightness, no residue, no noise, and no pollution. This mixer is made of stainless steel or carbon steel.
    1. Horizontal Double Ribbon Feed MixerThe horizontal double ribbon feed mixer features speedy mixing, high efficiency, high evenness degree of mixed materials. It is equipped with double ribbon rotor, and can add liquid. The mixing uniformity is no more than 7% CV, and the mixing period ranges from 4min to 8min. This mixing equipment is widely used for mixing compound feed, premixed feed, poultry feed, foodstuff, chemicals, etc.
    1. Colter Feed MixerThe colter feed mixer combines the action of colter in low speed and fly-cutter in high speed, so as to achieve uniform mixture in a short time. This mixing equipment is suitable for the mixing of easy-blocking or sticky materials.
    1. Conical Double Spiral Feed MixerThe conical double spiral feed mixer is suitable for mixing powder, pellet, and liquid (spray) materials. It can also be used for mixing high heat-sensitive materials, materials with big difference in density, rough and tiny materials, fiber or flake type materials, and pellet materials. This mixing equipment features high mixing uniformity and appropriate mixing period.
    1. Conical Spiral Ribbon Feed MixerThe conical spiral ribbon feed mixer is equipped with a single-grade reducer, which connects single spiral in the center and thin ribbon in the cone to turn around on the same speed. It can also be driven by an inverter. The scratch paddle, inner spiral or outer ribbon can be changed to meet different mixing requirements. This mixing equipment is adopted to blend sticky liquid, wet, paste, or powder type materials.
    1. Weighing Oil Add MachineThe weighing oil add machine is used for adding liquid animal, plant or seed oil into feed in the mixing process. It adopts weighing device and PLC control system, which ensures accurate metering and high degree of automation. The oil tank of this mixing equipment features steam heating, auto filling, and constant temperature.
    1. Hammer MillThe rotor is directly connected with the motor, and driven in inertia balance. With powerful magnetism filter device, the hammer mill features high efficiency. It is widely adopted for crushing corn, soybean, wheat, bean pulp, etc.
    1. Vertical Micro Grinder MachineWith centrifugal impeller, alloy blade, main bearing with water-cooling system, and observation window, the vertical micro grinder machine is used for the micro grinding of aquatic feeds, rice, mineral products, wood flour, cellulose, rice hulls, etc. Due to the low temperature of grinded materials, it is especially good for grinding heat-sensitive products.
    1. Drop Shape Fine Hammer MillWith the adjustable hammer, the drop shape fine hammer mill can realize easy transfer between normal grinding and fine grinding. The inlet and outlet can be swapped and the motor direction can also be changed accordingly. The movable full-open operation door allows for convenient replacement of accessories, the special designed secondary grinding room provides large grinding space ...
    1. Drop Shape Hammer MillThe special designed secondary grinding process allows the feed mill to achieve ideal milling effects. This drop shape hammer mill makes easy transfer between grinding process and micro-grinding process possible. It also features low noise, stable performance, and is suitable for milling granules, powder type materials.
    1. Horizontal Micro Grinder MachineThe horizontal micro grinder machine is mainly used for the micro grinding of materials like corncob, wood, and rice pulp.
      Model: SWFW75D
      Power: 55kw
    1. Double Roller CrusherThe double roller crusher can crush the pellet materials from ∮3-8mm to ∮0.7-2.5mm. It features high output and low cost.
      Model: SSLG15x50
      Output: 1~3t/h
    1. Ring Die Pellet MillThe ring die pellet mill is driven by a single motor to realize feeding, adjusting and palletizing process. The frequency-control feeder allows for accurate feeding, while the conditioner is flexible to meet different milling requirements. It is also equipped with over-loading protection and molasses feeder. This Pellet Mill is suitable for producing pellet for feeds, fertilizers, hops, etc.
    1. Straw Pellet MillThe key parts of the straw pellet mill are made of alloy steel, which ensures strong and malleable structure.
      It is widely used for pelletizing wood, straw, rice hull and other biomass sources.
      This Pellet Mill features high performance, long service life, and low maintenance cost.
    1. Counter Flow CoolerThe counter flow cooler is used for cooling the pelleted feed from 70º-80º to the normal temperature. It adopts the counter flow of the air to realize cooling purposes.
      Model: SKLN1.0
      Time period: >4-8min
    1. Vibrating Grading SieveThe vibrating grading sieve is powered by two vibrating motors, and equipped with stainless steel sieve. The totally enclosed vibrating bolts are supported by four pieces of rubber shock absorber. This grading sieve features no dust, no noise and high efficiency. It is suitable for screening and grading pellet products, shattered materials in feed, foodstuff, chemicals, mining, organic fertilizer industries, etc.
    1. Rotary Grading ScreenerThe rotary grading screener features high efficiency, no vibration, low noise, easy change of screens, and reliable performance.
      Model: SFJH80
      Dimension of screen: 1600x800mm x mm
    1. Rotary Drum SieveThe rotary drum sieve is used for removal of straws, hemp ropes, clods, papers, shavings, leaves, and other impurities from raw materials in feed mill, floury plant, grain silo, etc. It has features of high capacity, low power consumption, simple structure, space saving, easy installation and maintenance, convenient replacement of drum screen, excellent performance of separating and cleaning.
    1. Conical Powder SieveThe conical powder sieve is used for the first cleaning and final inspection of the powder materials.
      Model: SCQZ60x50x80
      Output: 10~15t/h
      Power: 5.5kw
    1. Double Layer Cylinder SieveWith dust collection hole, the double layer cylinder sieve is used for removal of foreign matters from the raw materials. The angle of sieve can be changed according to different sieving requirements. This sieve features low cost, high productivity, high efficiency, convenient replacement of screen, and space saving.
      Model: TCQY85 / TCQY100 / TCQY150
    1. Pulse Dust CollectorThe pulse dust collector is used to filter and recover valuable dust generated during the working process, or remove particulate pollutants from materials like feed, flour, chemicals, minerals, cement, etc. There are two shapes for your option, flat or drum.
      Model: TBLM4 / TBLM6 / TBLM9 / TBLM12 / TBLM18 / TBLM21 / TBLM28 / TBLM40 / TBLM56
    1. Permanent Magnet BarrelThe permanent magnet barrel is used for cleaning up metal-bearing impurities for feeds, flour, grains, etc. It has over 99% working efficiency, with no power required.
      Model: TCXT15
      Output: 10~15t/h
    1. Revolving DistributorTFPZ series revolving distributor can convey the materials to a predetermined location, or convey the materials from a point to multiple points by remote control. It can adjust position and fix position automatically, so it is widely used to distribute the raw materials or intermediate products into bins.
      TFPZ series revolving distributor is the best automation equipment to replace screw conveyor.
    1. Bucket Elevator ConveyorThe bucket elevator conveyor is the most popular vertical conveyor for delivering powder, pellet and nub type materials. It has features of self correction, anti-reverse. In addition, the alarm system is also available.
      Model: TDTG26/15
      Output: 5~15m³/h
    1. Drag ConveyorThe drag conveyor is used for long-distance conveying of powder or pellet materials in feed and premix mills. It features self-cleaning and continuous horizontal convey.
      Model: TGSU16
      Output: 10~20t/h
    1. Spiral ConveyorThe spiral conveyor is used for the horizontal or slopy conveying of materials in feed, grains processing, foodstuff, mining industries, etc. There are O-shaped and U-shaped bottom frames for your option. Extra exhaust inlet and materials sealing equipment are also available.
      Model / TLSS16 / TLSS20 / TLSS25 / TLSS32 / TLSS40 / TLSS50
    1. Propeller Feeding MachineThe propeller feeding machine consists of groups of cross propellers. It is also equipped with a magnet selector, which can easily remove the iron impurity. With frequency-changing motor, the propeller feeding machine can control the feeding volume. It also features easy installation.
      Model / SWLY1 / SWLY2 / SWLY3 / SWLY4 / SWLY5
    1. Pneumatic Slide Gate, Electrical Slide GateThe pneumatic slide gate, electrical slide gate has high air tightness because of graphite or blanket seals.
      There is no jam during the sliding of the gate plate.
      The welded housing ensures higher durability and better dependability of our pneumatic or electrical slide gate.
    1. Three-Way Pneumatic DistributorThe three-way pneumatic distributor has features of high capacity, low energy consumption, easy maintenance, convenient and safe operation, etc.
      Customized three-way pneumatic distributor is also available in our company.
      The cylinder is adopted to push connecting rod to move.
    1. Belt ConveyorThe belt conveyor has features of high conveying volume, simple structure and easy maintenance. It can also be combined with conveyors of different sizes and types. Due to these advantages, the belt conveyor is widely used for conveying loose or packed materials.
      Width: 400mm / 500mm / 650mm / 800mm / 1000mm / 1200mm
    1. Bulk Feed SiloThe Bulk Feed Silo is made of galvanized steel sheet, and has the leak-proof function. It can load materials with large quantities, ranging from 10T to 10000T. This tank can also fully discharge feeds with no residues.
      Diameter: 3.7-27meters
      Conical bottom angle: According to buyers' requirements
    1. Air-Stream Rotary Drum DryerThe air-stream rotary drum dryer combines the advantages of rotary drum dryer with slope and air-stream dryer, featuring space saving, high efficiency, light weight, wide applications, flexible temperature control, etc. Our air-stream rotary drum dryer is mainly used for drying flake or fiber type materials with high humidity, such as grass, leaves and flowers.
    1. Rotating Cylinder DryerThe main body of the rotating cylinder dryer is a rotating cylinder with slope, the rotating speed of which can be adjusted. Feeded by the feeder, the wet materials are first distributed evenly by the mixing plate inside the cylinder, and then dried by the hot air. The shape of the mixing blade is optional for drying different materials. The advantages of our rotating cylinder dryer include simple structure ...
    1. Fluidized Bed DryerThe filtered clean air is first heated by heat exchanger, and then led to the ebullator through distribution valve. At the same time, humid materials enter the fluidized bed dryer through feeder and boil because of the air pressure. In a short time, the water will be evaporated. The dried material is discharged from material outlet, while the exhaust gas is discharged from the top of the ebullated bed ...
    1. Air Stream DryerThe air stream dryer is used for drying muddy, powder or block type solid materials. It will mix the wet solid materials with hot air-stream to transfer the heat and dry the materials, so as to get dry pellet materials.
      Model: QG100
      Evaporation Capacity: 100kg/h
    1. Revolving Flash Vaporization DryerThe materials that need drying enter the revolving flash vaporization dryer through the spiral feeder. Under the strong action of high speed revolving mixer, the materials are crushed and dispersed by the effect of friction. The crushed materials then fully contact with the hot air, and get dried.
      The powder materials after dewatering rise with the hot air, and then classified by the annular classifier.
    1. Drum Hot Air FurnaceThe drum hot air furnace adopts the latest indirect heating technique, which combines burning and heat exchange. As the smoke and hot air are separated in different channels, this drum hot air furnace can achieve high heating efficiency (more than 60~70%). It also features no pollution, small size, easy installation, reliable performance, etc.
    1. Coal Fuel Hot Air FurnaceThe heat exchanger has hot plate, hot pipe or array pipe types for your option, while the hot air ranges from 100℃ to 450℃. Our coal fuel hot air furnace has advantages of high temperature, high heating value, high efficiency, and so on. It can be commonly found in chemical, mineral, foodstuff, grain and other industries, and can also be assembled with other drying equipment.

Feed Processing Equipment

We is a professional feed processing equipment supplier in China. Our company offers straw pellet mill, rotary drum feed mixer, harvesting machine, disc blade, auto broiler pan feeding system, and others.

Feedback Form
Other Products
    1. Disc BladeOur disc blade is available in various diameters from 254mm to 960mm and thickness from 3-12mm with difference in concavity. The main two types of blades are plain disc and notched disc.
    1. Harvesting MachineThis harvesting machine has multiple functions, including digging out fruits, pulling up seedlings, clamping convey, shaking off soil, picking up fruits, vibration sieving, separating by roller ...
    1. Ploughing MachineThe ploughing machine, also known as plough or plow, is a tool used in farming for initial cultivation of soil in preparation for sowing seed or planting. It can be divided into moldboard plow, chisel plow ...
    1. Disc HarrowA disc harrow is a farm implement that is used to cultivate the soil where crops are to be planted. It is also used to chop up unwanted weeds or crop remainders. The disc harrow consists of many iron ...